The first question is how much paver restoration costs—the typical job costs from $150 to $1000. The price of equipment varies with the type of stone and the damage. Minor repairs can be accomplished by DIYers, while larger professional jobs may require skid loaders and backhoes. The cost of materials depends on the type of repair needed and the amount of space the job covers. You can also purchase sand and gravel in smaller bagged quantities, or you can hire a professional to do the job.
Super Clean Surface
The process begins with a thorough cleaning. First, the paver sealer must be removed, followed by hot water washing. This will provide a super clean surface. The next step is joint sanding, which will make the paver look new again. The next step is to remove any moss or oils from the surface. Once the cleaning is complete, the Paver restoration in Orlando process will include a re-sealing of the surface.
The second step involves excavating the area and removing any concrete or pavers that may be present. The excavation will require up to six to eight inches of dirt, depending on the size of the area. This step can be a bit time consuming, but it’s worth it in the end. You can save a lot of money by hiring a professional to restore your pavers. It’s also a good idea to hire a company that specializes in paver sealing. The costs involved in this project are relatively low and can quickly be done in your home.
Quality of Materials
If you are a do-it-yourselfer, you can perform the repairs yourself, but you must invest in the necessary equipment. The cost depends on the amount of damage, the quality of materials, and the installer’s expertise. Some repairs are easy enough for experienced do-it-yourselfers, while others require the services of a professional landscaper. If you don’t have the time or expertise to tackle the job, you can hire a paver specialist to do the work for you.
Some Tools & Supplies
Whether you want to restore pavers yourself or hire a professional, the first step is preparing the area. You’ll need some tools and supplies. Depending on the type of repair you want to make, the sand base can cost anywhere from $0.50 to $0.05 per square foot. However, if you have a large project, the labour and materials of a professional can be up to two to three times as expensive.
Water-Soaked Problem
A sealer is a permanent solution to the water-soaked problem. While the chemical-based method is expensive, it will protect your paver installation for years to come. The process of sealing pavers is relatively simple, and it only requires a single visit to your home. A professional will also seal and sand your pavers, which will ensure that they’re properly sealed. If you’re in the market for a new paver installation, you’ll need to consider contacting a specialist.
Flagstones & Patios
While you can do it yourself, the cost of hiring a professional is best for larger projects. Bricks, flagstones, and patios can be repaired with a small amount of money. If you’re restoring brick pavers, the cost of sealing can range from $150 to $500 per square foot. A professional will use a non-toxic product and resand the joints before applying the sealer.
Water-Resistant Sealant
The most common problem with paver restoration is the lack of a sealer. The material used should not be too slippery. The sealer should have a water-resistant sealant. It should also have antimicrobial properties. If you’re in Florida, you should hire a contractor who is insured and licensed. If you’re not sure what type of sealer to choose, ask the company for references. The cost per square foot depends on the type of paper.
Final Words:
The cost of paver sealing depends on the location of the project. Generally, the cost of sealing pavers depends on the type of paver, the size of the project, and the overall complexity of the job. In California, it can be as low as $3.00 per square foot. In Florida, however, the cost of paver sealing is $1.50 per square foot. If you need a sealer for your paver, the price is around $30 per square foot.
